Automatic Comprehensive Compound Unit and Hydraulic Foaming Machine
for Solar Water Heater Production Line
1. Hydraulic foaming machine
The series adopts the most advanced SBP technology, which
effectively ensures the stability of the raw material flow
pressure, so that the mixing of the two-component raw materials is
more uniform; the compact and simple optimized filling gun
structure makes the wearing parts tend to zero, powerful The power
has completely solved the problem of blocking guns that have long
plagued small foaming equipment; the user-friendly operating
platform makes the operation of the whole machine simpler and easy
for anyone to master.
380V 50HZ 5000W
Working hydraulic pressure:
Maximum driving force of the system:
Single component raw material working pressure:
Raw material discharge volume:
The foaming system is the most advanced and durable foaming machine
in the foaming field in China, and it will create more abundant
benefits for your enterprise.
2. Automatic test slot
Introduction & Technical parameter:
The water tank water tank inner leak detector is to place the inner
tank on the test preparation platform, and the initial preparation
work is completed. After all the holes are accurately in place, the
water inlet test is started. After setting a certain time keeping
pressure, the gas in the tank water tank is detected. Is the leak
leaking? Is there a bubble? Accurately observe the location of
specific leaks. Workers can further process according to their
inspection results; or they can be sent to the next process and
cycle according to this.
1) Rated voltage: 220VAC 50HZ
2) Rated power: 1.5KVA
3) Compressed air: 0.45Mpa
4) Lower cylinder range: 0~800 mm
5) Drive cylinder range: 0~700 mm
6) Adopt Taiwan's silver linear guide and cylinder drive.
7) The electrical part is warranted for one year.
8) The device has the functions of automatic plugging, moving,
pressing down to the origin, and unloading. It has the choice of
double station and single station, and has the advantages of high
speed, high efficiency and less labor.
3. Covering machine
1) Barrel diameter: Φ=220-480mm
2) Workpiece thickness: t=0.4-0.6mm
3) Maximum barrel length: L=2000mm
4) Material: pearl plate, stainless steel, galvanized plate, color
steel plate, etc.
5) Rated voltage: 380V 50HZ
6) Rated power: 0.75KW
7) Compressed air pressure: 0.6Mpa
Adjust the screw to determine the effective stroke of the
workpiece. ⇒ Manual assembly of the end cap. ⇒ Move the workpiece
to the device. ⇒ The manual operation button is the cylinder
pressure. ⇒ Manually offline.
4. Automatic Discharging, Leveling, Counting and Cutting Shearing
stainless steel SUS304-2B 316L, σb ≤725 N/mm2
Processing plate thickness:
δ = 0.4 ~ 1mm
Processing board width:
The outer diameter of the coil:
φ800mm ~ φ1500mm can be adjusted to accommodate the outer diameter
of the coil within this range
The inner diameter of the coil:
φ508mm to meet the requirements of the conventional coil inner
≤ 1mm / m2
500 ~ 3200mm
≤ ± 1mm / m
8 ~ 10 pieces / min (length 2000mm length)
Environmental power parameters:
380V/50 HZ, voltage fluctuation is less than 5%
The total power of the production line:
The production line running direction:
right into the left out (east into the west, the motor is on the
north side, operating on the south side
The production line covers an area of:
20m × 6m
The components of a machine:
1) Laminating machine:
This series of machines consists of upper and lower rubber rollers,
frame, power transmission and control device, and membrane support
frame. It has the characteristics of flat film, no wrinkles, no
bubbles and long service life. The heating technology inside the
rubber roller, high heating efficiency and safety; the temperature
and speed can be adjusted freely and applied to different
materials. The product adopts steel roller pressure and laminating
speed, which can be adjusted arbitrarily, and the machine operation
is simple and convenient.
2) Conveyor belt:
After the shearing machine has finished cutting, the sheet conveyor
conveys the sheet to the palletizing device.
The conveyor belt consists of a whole seamless non-slip belt,
frame, motor, reducer and so on.
3) Palletizing trolley:
The steel frame is made and the countertop is flat. The caster foot
is equipped with a universal wheel with brake function, which can
move in all directions and is easy to operate.